www.vieler.net / Display Case Hardware , Category: Type 150

tilt-forward front mounted display case hardware
front glass assembly by screws
dimensions H 65 x 38 x L 200 mm per hardware element
fully transparent front without glass clamp profile
glass thicknesses 6, 8, 10 mm
suitable for glass dimensions height H max. = 600 mm, glass length L max. = 1,600 mm
with 6 mm glass thickness max. glass length L = 1,300 mm
for glass lengths L > 1,600 mm use three elements; for larger glasses please contact us
suitable for straight vertical front glass or L-shaped glass
inclined assembly of hardware possible up to 20°
locks noiseless
opening of front glass 30°
tilting of front glass continuously adjustable +/- 2°
optional price tag rail
tempered safety glass recommended - please note that we assume no warranty on the glasses

Inclinded assembly of hardware up to 20° possible.

The hardware will be supplied in opened condition.
Please close the hardware only when the glass is assembled!

Hardware and components

1 - base profile segment
2 - hinge part
3 - front plate
4 - lever (with two safety devices)
5 - stopper (to steady position of hinge part within base profile segment)
6 - striker (optional, not included)

Hardware variations

Front mounted hardware with price tag rail low 443.2091.XXX:

Front glass

Glass cut-outs for screwed front glass

Assembly of front glass by screws

Assembly of front plate in hinge part (1), secure with screws from above (2).

Front plates for glass thicknesses

The hardware components are identical for the different glass thicknesses 6, 8, 10 mm, the only varying part is the front plate:

6 mm glass: L=21 mm 8 mm glass: L=23 mm 10 mm glass: L=25 mm

Adjustment of front glass

Turn strikers (1) by means of pointed pliers in order to adjust inclination +/- 2° of front glass.

Hole pattern

The base profile segment has got 8 holes by which the hardware is screwed to the counter.
Length of base profile segment L = 200 mm.
Use countersunk screws Ø 4 mm, min. 40 mm long.